AIC1-V6H/EV6

By on February 14, 2015 in Uncategorized

We have a new version of the AIC1 that controls six additional injectors. It is tailored specifically for the BMW N54 engine with a supplemental fuel rail. When coupled with larger turbos it is possible to double the horsepower of the stock engine.

The AIC1-V6H/EV6 comes with the R4 software that can be used to precisely tune the air/fuel ratio at high boost. The injectors are batch fired three times per cam revolution. All injectors are controlled by map table A. The stock TMAP sensor on the engine provides the voltage input to the AIC1.

AIC1-V4H_EV6 s

7 Responses to AIC1-V6H/EV6

  1. Ruru Chen June 6, 2015 at 4:54 pm #

    I want buy the AIC1-V6H / EV6,I live in taiwan ,How to buy it?

    • admin June 10, 2015 at 6:01 pm #

      You can email me at mark@splitsec.com and we can arrange payment by PayPal.

  2. Dusty October 26, 2015 at 3:20 pm #

    What injectors are to be used with this controller? What style? High impedance? Low impedance? size ect?

    • admin October 26, 2015 at 5:31 pm #

      The AIC1-V6H/EV6 can be used with high impedance injectors only.

  3. Kevin October 15, 2016 at 5:31 pm #

    Is this capable of seeing up to 30psi? I’m converting my MAP sensor to 4 bar now to see higher boost pressure. I’m building a throttle body spacer for 2 injectors for more fuel on my 3.5 ecoboost.

    • admin October 19, 2016 at 7:57 pm #

      The AIC1-V6H/EV6 uses an external map sensor. The pressure is displayed as a 0-5 V reading. The pressure range depends on the external sensor.

  4. Justin October 21, 2016 at 5:02 pm #

    Hey I would like to purchase one. Please send me paypal invoice to mvcompany18@gmail.com . Thanks !!